SOLAR PUMPS
Ceva 180
Pump specs
Model
Voltage
Power
Max flow rate
Max Head
Warranty
Features
- 100% Off Grid
- No Batteries Required
- Dry Run Protection
- MPPT Controller
General Data
- Outlet
- Pump Diameter
- Type of pump
- Submersible Depth
- Optimal Input Voltage
- Input Limit/Max
- 20 mm
- 75 mm
- Helical Rotor
- 70 m
- 120 Voc
- 160 Voc
Package dimensions
- Length
- Width
- Height
- Weight
- 660 mm
- 380 mm
- 180 mm
- 23 kg
Solar panel requirements
- Panels
- 450 Watts
- Voltage
- 46 V
- Quantity
- 3
Important information
-
Always stick to the recommended solar panel configuration for the best results.
-
Going over the controller’s voltage limit can damage it — and unfortunately, that won’t be covered by the warranty.
-
Ceva 180 pumps are designed to perform best when installed no deeper than 70 metres below the water level.
This is the recommended maximum to extend the pump’s lifespan and reduce pressure on internal seals. Shallower installations are also perfectly suitable and may further improve long-term reliability. -
Our performance estimates are based on around 6 hours of peak sunshine per day. For a more accurate recommendation based on your exact location, try our easy-to-use Solar Pump Sizing Tool.
Frequently asked questions
Our warranty is a limited liability warranty against manufacturer defects. If there are any issues with our solar pumps during the warranty period, please contact us. We have a fully functional pump workshop and keep spare parts in stock. We also offer remote support, if the issue is not resolved you can submit a claim request. If the claim is approved we will replace the defective product or part.
Spitfire Range – 12 months
Premium Range – 24 months
Multiflow Range – 12 months
From date of purchase from Cedar Solar SA (Invoice Date)
You will need the following to complete the installation:
- Three Core Submersible Cable. 4mm up to 60m and 6mm up to 120m.
- Cable Splice Kit to connect the pump power cable to the submersible cable
- A baseplate to secure the pump to the top of the borehole and keep everything in position
- Polyprop Rope to secure the pump to the baseplate
- Solar cable (optional) if the panels are installed further than 3m from the borehole
- Pipe – Water pipe 32mm HDPE is the most common
- Pipe Fittings – to connect the pump to the pipe, baseplate and pipeline
- Groundmount to ensure you panel is installed at the optimal angle to the sun
No installation is not included.
We can quote on installation in Gauteng.
Outside of Gauteng (and parts of Southern Africa) we work with a network of 150 independent solar pump installers. We will put you in touch with your nearest installer that can quote you on the products and installation. Their pricing in-line with ours and you will have local support which is important.